IF YOU HAVE A CAP AND BALL REVOLVER,YOU
NEED TO PURCHASE THESE.HAVE SEVERAL COLTS AND REMINGTON PISTOLS. HAVE THESE NIPPLES ON ALL. NO PROBLEMS WITH CAPS FALLING INTO ACTION AT ALL. BUT,MAKE SURE YOU USE REMINGTON CAPS.

Doing research for new nipples. Most of these reviews show good reviews for the Pieta 1858 N.M.A.'s. I'm not seeing good reviews relating to the Uberti 1858 N.M.A.'s. So the messeage I am getting is that these SliXshot nipples will not work in the Uberti 1858 N.M.A.'s out the box, or maybe even not at all.



Reply from Badman Bullets:

You will get optimum service from these nipples if your revolvers have been tuned and properly prepared. One size may not exactly fit all. Some versions of the same brand of firearm can have different tolerances but this is very rare. We sell tons of these nipples and at this point in time, NONE of the Uberti nipples have been returned because they would not work. This review is from someone who never made a purchase.

Great Product, superior design and quality, prompt delivery...

I've put these on a Remington 1858 from Pietta and fired nothing but Pyrodex pellets through it - without a single misfire or problem. The Remington #10 caps fit snugly and properly. The stainless steel is easy to clean fouling off with a brass brush.

I love these nipples, nice job.

I put these on all my black powder guns they eliminate caps falling into the mechanism and jamming when shooting.

The Slixshot nipples are great. The only thing that you must know is that the CCI 10 caps do NOT fit on them, you must use the Remington 10's.

I am very happy with my purchase worked as advertised fast delivery thank you !!!

Really works excellent ordered two sets gonna order one more set before long better than anything I have tried so far.

Great Product , I would highly recommend these Slixshot Black Powder nipples . They work great in my Uberti 1858 Remington New Army revolver !!!!!

As per instruction nipples worked out well. Thank you

The nipples really work good no misfires .

Very good ammo no misfires good power going to buy again

Haven't had a chance to use the product (Slixshot nipples) yet,but I am impressed with Badman Bullets customer service.

Recently ordered some slixshot's for my C&B pistols. I was mostly impressed with Badman's fast shipping and excellent service. You can't go wrong.

I highly recommend these Slixshot Black Powder nipples , they made a night and day difference in the performance of my 1858 Remington .44 cal.New Army revolver . GREAT PRODUCT !!!!!!!!!!!!!!

Caps no longer fall off and get stuck between cylinder and frame. Big improvement on firing reliability.

Great turn around service & product. I
will be ordering again soon.

Thanks Jimmy

Easy installation, and I saw immediate improvement over stock nipples. I've only put a hundred or so rounds down range,but overall I'm impressed.

Haven't shot with the new nipples yet, but have read several positive reviews and expect good results. Will comment after I get to the range.
Rating based on other reviews, YouTube videos.

Just received my order (again) of SliXshot nipples. I go thru a lot if them, setting up Cap Guns for CAS.
SliXshot are, in my opinion the best available and
BADMAN service is just SUPERB!!

I have a peitta 1851 navy and I was having a fail to fire at lest once per fully loaded cylinder. I tried differant powders and caps none worked any better. I come across these searching the Internet so I tried them. after about 72 rounds I have not had one miss fire. well worth the money I will put these on every black powder revolver I own.

Colts need Slix shot nipples to prevent them from eating caps. Found that out the first time I shot one. Then a little chamfer so the ball sweges in instead of getting cut up on the edges and then colts are perfect and problem free -love em.
Thanks Badman Bullets for supplying them!

This product is a must for all percussion cap revolver shooters. They are stainless steel and do NOT foul . Badmanbullets service is fast and efficient.

Exact match for the s/s oem. Appear very well made. Pricey but should last for years. Will buy again. Thanks

As usual, outstanding service. I'm a repeat customer
and really appreciate the excellent service. SliXshot
are, of course, Simply The BEST

The nipples are much better than the Pietta nipples that came in the gun. But the package said for #10 caps. All I had were #11 caps CCI. But it was to tight to fit the nipples. The only caps that fit well were Vorderlader Zundhutchen #11. They fell out of the pistol as designed, but any other cap fell into the gun and I had to tear it down to clear it after every shot. Got any clues where I can find more of those caps?



Reply from Badman Bullets:

The SlixShot nipples were designed for and work best with REMINGTON #10 caps.

Great product #10 Remington caps fit great and easy to put on by hand. Installed on Uberti 1858. Thanks for a great product!

work great with a #10 percussion cap

I have Slixshot nipples in both my Uberti and Pietta cap and ball revolvers and love them!

They keep the caps from fragmenting allowing the caps to fall off properly during cylinder rotation. I have never had a misfire with them and find them to be of better quality than the Italian nipples.

Go for it!

Ordered cones (nipples) for Uberti 1858 and Ruger Old Army. Have not used but beautifully machined and items arrived very quickly. Will go to Badman for supplies needed in the future. Very happy.

I am just a novice only recently involved with black powder revolvers. I haven't fired any yet! As soon as I read about Slixshot nipples, I was convinced to order a set and replace my 51 colt navy's with them.
I am very pleased with them and the service rendered by Badman Bullets and expect to be very happy with their performance when I actually fire this gun!

You guys are great. Great products fast delivery

These fit my pistol perfectly and all the caps fit and fired off! A great upgrade for my pistol.

The dimensions are right on the money, and I have no complaints about the quality. What a great product!

They didn't even make it a year before they deformed. I do not dry fire this revolver and they deformed so that I can not cap them any more.



Reply from Badman Bullets:

The revolver needs to be tuned properly which includes fitting the cylinder and dressing the hammer. SlixSprings Nipples are not designed for heavy springs either. This customer never made an attempt to contact us regarding this matter. We would honor the product and send replacements along with help tuning the gun. We have original nipples that were used for testing in 2010 without heat treatment or hardening and they are still functioning fine today.

had out my uberti colt walker twice since I swapped on my new slixshot nips this year(2016). haven't had a single misfire. very good investment if you value your range time!

Awesome product

Great product. I have these cones installed on my 1860 Army. The caps flatten out nicely and drop to the ground when the cylinder is rotated. The caps do not get hung up between the hammer and frame or between the cylinder and frame as they would sometimes do. The 1860 Quigly used in the famous shoot out scene must have had similar cones, LOL!

These nipples really work to prevent cap sucking.

I had pretty well moved away from shooting my cap and ball revolvers because they jammed regularly. I had just recently picked up an 1851 so I decided to equip it with Slix Shots, as well as my 1860 which was a notorious cap sucker. The Slix Shots did the trick. I have yet to encounter any jamming with them.

Changed to these nipples from the stock Pietta nipples on my 1851 Navy pistol. No caps getting caught up in the cylinders. Caps [No. 10s] go on without problems. Caps fire consistently and I think have improved my scores. Recommend this a great upgrade for the 1851 Pistol.

SliXshot nipples really deliver. I use them in ALL my
BP guns. Shooting Gunfighter with Cap Guns, I can't
afford problems. Great Product.

Excellent product, reduced cap pull off by 90% on my Pietta 1851 Navy. I'm glad I bought them.

Nipple are too long for Uberti 1873 Cattlemen black powder revolver. Interfere with cylinder rotation. Will try to shorten by filing to make work.



Reply from Badman Bullets:

You are correct. SliXshot nipples are designed for 1851 through 1860 Models only. This is stated on our product page. Product Page

Every time I order a new BP revolver I get a set of these for it. They ALWAYS beat the gun to my house due to fast shipping. They work fantastic and rid you of the classic BP revolver issues. Great Product...Great service!!!!

Great product. #10 caps are a perfect fit.

These nipples work perfectly. No jamming from spent caps. I recommend them for all of your cap and ball revolvers.

Order for nipples was shipped promptly. Easily installed on Uberti 1858. Fired #10 caps stay in place as the cylinder advances, but are easily removed with fingertip for reloading. Intend to order a set for 1860 Army.

I used them for the first time Saturday, flawless, no jams, no misfire!!!